UKAS ISO 17025 AccreditedBS EN 16165:2021 Compliant Court-Defensible Reports24-Hour TurnaroundNationwide Coverage UKAS ISO 17025 AccreditedBS EN 16165:2021 Compliant Court-Defensible Reports24-Hour TurnaroundNationwide Coverage

Construction & Handover slip testing in Birmingham.

For construction & handover operators in Birmingham, the real cost of a slip claim is rarely the claim itself — it's the absence of contemporaneous, defensible evidence that the surface was tested. That's what we provide, accredited to UKAS ISO 17025.

/ The local picture

Why slip testing matters for construction & handover in Birmingham.

Birmingham's construction & handover estate concentrates around the Bullring, Brindleyplace and Aston, with a wider catchment across Edgbaston, Sutton Coldfield, Erdington, Selly Oak, Hall Green and the rest of West Midlands. The HSE region of competence is Midlands.

Within this sector, the typical risk vectors are specification drift between design and installation, treatment regimes that void manufacturer warranties, snagging defects. Pre-handover slip testing prevents costly post-occupation remediation and protects against long-tail PI exposure. The duty-holder is regulated by the CDM Regulations 2015, the HSE, building control and the ultimate end-user / operator, and pre-completion slip testing is the cleanest evidential mechanism for resolving installation defect disputes between main contractor, sub-contractor and client.

Typical surfaces we test in Birmingham construction & handover sites include newly-installed flooring of every type, with manufacturer specification verification. Where the surface is wet, contaminated, or in a barefoot zone, the appropriate slider and contamination protocol is selected at the point of test.

1.15
Birmingham population
24h
Report turnaround
17025
UKAS Accredited
4h
Quote response
/ Methodology

How we test in Birmingham.

Testing is in accordance with BS EN 16165:2021 Annex C and the UKSRG 2022 Guidelines. Pendulum measurements are taken in multiple directions per location, both wet and dry where contamination is foreseeable, and reported as PTV with UKSRG slip-risk classification (low / moderate / high).

For construction & handover specifically: specification verification testing on all wet-area, entrance, ramp and changing facility surfaces before practical completion.

Reports are PDF-delivered within 24 hours of the site visit. They include the full PTV dataset, photography, calibration cert references, UKSRG classification, methodology narrative, and remediation recommendations where any test point falls below the relevant slip-risk threshold.

/ Process

From quote to compliant report.

1. Quote

Tell us the Birmingham site postcode, surface type and approximate area. Fixed-fee written quote within 4 working hours.

2. Schedule

Booked into the next available slot for Birmingham and West Midlands. Out-of-hours and weekend work routinely arranged.

3. Test

UKAS-accredited pendulum testing on site. Wet, dry, multi-direction. Verbal feedback before our engineer leaves.

4. Report

Signed PDF report inside 24 hours. PTV dataset, classification, photography, calibration certs, remediation guidance.

5. Aftercare

Free phone consultation on findings. Independent remediation guidance. Discounted re-test after any treatment work.

6. Annual review

Optional annual re-test programme to maintain auditable continuity for your insurer or HSE inspection record.

/ More in Birmingham

Other sectors we test in Birmingham.

/ Construction & Handover elsewhere

Construction & Handover slip testing in other UK cities.

/ FAQ

Common questions.

How quickly can you reach a construction & handover site in Birmingham?

Standard mobilisation to Birmingham and West Midlands is 2–5 working days. Urgent or post-incident response within 48 hours is available — call 0208 246 5562 to confirm capacity.

Are you UKAS accredited for slip testing?

Yes. Our pendulum slip testing is performed under our UKAS ISO 17025 accreditation, using calibrated equipment with traceable certification. UKAS accreditation is held by a minority of UK slip-testing providers and is the most defensible credential for an evidential report.

What happens if my Birmingham construction & handover site fails the slip test?

You receive a clear narrative of why it failed, which test points are problematic, and a tiered set of remediation options — operational controls, surface treatment, or replacement. We are independent of treatment manufacturers, so the advice is free of conflict.

Will the report be accepted by my insurer or by the HSE?

Yes. Reports are formatted to meet the evidential standards expected by UK insurers, the HSE region Midlands office, and the courts. Calibration certificates and chain-of-custody documentation are included as standard.

Do you cover West Midlands in general, not just Birmingham city centre?

Yes. Our Birmingham field cover extends across Edgbaston, Sutton Coldfield, Erdington, Selly Oak, Hall Green and the wider West Midlands at no additional travel cost. Single fixed-fee quote, inclusive of travel.

Get a fixed-fee quote in 4 hours.

Tell us where, what, and when. We'll come back with a written quote, an engineer name, and a date — not a brochure.

Speak to us directly
0208 246 5562
Mon–Fri 08:00–18:00 · Out of hours: emergencies only
Or email the team
info@surfaceperformance.com
Request Quote
Quote returned within 4 working hours · No obligation · Powered by Zoho Forms